We often have special offers, surplus stock or factory run items, which we are able to offer at a discount.  Please check back regularly to see our latest deals.

(Prices exclude VAT and are subject to carriage charges unless otherwise stated
)
                           

 

Snow Chains suitable for 295/80-22.5 Tyres

These chains are new however were tried on some Bridgestone M729 tyres which they do not fit.

European manufactured for all round quality and durability.

Don't wait for the bad weather, act now and protect your business.

Quantity available: 1 pair

Price:  £265.00

 

Factory Run / Take-Off Wheels

We stock a large selection off Factory Run / Take-Off rims including sizes:

7.50x22.5

8.25x22.5

9.00x22.5

11.75x22.5 Center Nave & Front Steer

Please speak to our sales team who will advise pricing and availability.

 

 

6.00x17.5 6 Stud Mitsubishi / Isuzu Wheels (large stud hole type)

Brand new wheels to fit 215/75-R17.5 tyres along with similar sizes.

Centre Bore: 164mm / PCD: 222.2mm / Offset: 130mm Half Dual Spacing.

Please see our technical section to confirm dimensions or call one of our sales team.

Quantity Available: 20pcs (no carriage charge on 2 or more wheels)

Price: £155.00 each

 

 

Goodyear 285/70-R19.5 RHSII Steer Tyres

As new, factory mileage only before being replaced with aluminium wheels in the factory.

These are the RHSII steer pattern.  Please see above for the drive pattern tyres.

Can be supplied with wheels if required, please talk to a member of our sales team for pricing.

Quantity Available: 0pcs (more due in a few weeks)

Price: £125.00 each

 

 

Wheel Nut Retaining Rings suitable for 6 stud vehicles

Size: 6 stud for either 205 PCD or 245 PCD

Brand new rings for 6 stud vehicles.  Used as an alternative to wheel nut indicators to prevent any movement of the
wheel nuts.  Please see our what we do section for more information.

Available in Yellow, Silver, Orange, Red & Black.  Please check the size of the hex on your wheel nuts before ordering.

Price: £7.50 each.

 

 7.50 x 22.5 10 Stud Truck / Bus  / Trailer Wheels (Cosmetically imperfect)

These wheels have been sat in our yard for sometime and so have some 'weathered' marks including slight scratches and some very minor rust marks. They are new, never been fitted with tyres.

Due to condition, we are selling them at this bargain price.

Suitable for spigot mouting.

Quantity available: 36pcs

Price: £55.00 each.

 

270/30-14 Fast Road Quad Bike Tyre

SOLD OUT, PLEASE ENQUIRE ABOUT FUTURE AVAILABILITY

 

11.75x22.5 120mm offset Satin Alcoa Aluminium Truck/Trailer Wheel - Factory Run Condition

Suitable for tyre size 385/65-R22.5  (Other sizes permitted, please check)

These wheels have been fitted to tyres (never to a vehicle) and have some fitting marks. One wheel has a dent on the edge of the rim as can been seen in the photo.  This however will not affect the tyre sealing on the rim. 

Photos of the damage can be emailed if required.

These are the machined finished Alcoa wheels with 26mm standard stud holes.

Quantity available: 2pcs         Price: £90.00 each.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

 

 

 

 © ASPECT COMMERCIAL WHEELS LTD  | TERMS AND CONDITIONS     SHARE   TWEET   LIKE 1  DIGG                  

 

Welcome to Aspect Commercial Wheels Limited We are one of the leading manufacturers and distributors of steel and aluminium Commercial, Industrial, Earthmover, Agricultural and Plant wheels in the UK, along with various other allied products. We specialise in wheels for truck, bus, lorry, trailer and large van, holding one of the UK’s most comprehensive range of commercial wheels. Our services are available to both trade and public and we have a very experienced sales team who will advise and guide you through any enquiries you may have, whilst offering the best solutions and the most competitive prices. Aspect Wheels has been trading for over 25 years and has built its reputation based on holding a huge range of quality products, an unbeatable technical knowledge and a customer service level that’s second to none. Our head office, along with our accounts, is based in Uxbridge, with our main storage and manufacturing facilities based in Coleford, right in the heart of the Forest of Dean. In 2003, as part of our commitment to continued success and to strengthen our position in the market place, we acquired Cambria Wheels in Cardiff. This union ensured we remained one of the market leaders, distributing wheels from the very best manufacturers in the world including Hayes-Lemmerz, Sudrad, Michelin-Kronprinz and Jantas. We specialise in wheels for lorries, buses, trucks, trailers and large vans as well as wheel accessories such as wheel nuts, valves, safety rings and more. Please see our ‘what we do’ page for more information. So, please remember, if you are looking for the very highest standard of wheel and/or wheel accessories, or just some expert technical advice, please do not hesitate to contact one of our sales team, we are always here to help.